|
|
Rx62a Overview
|
|
|
|
|
|
|
PRODUCT: Rx62a
PCB ID: 62a
INSTRUCTIONS: Rx62-1 | Rx62-2 | Rx62-22 | Rx62-3
PROGRAMMING: v610
ALL FEATURES
DESCRIPTION:
Receiver for surface vehices.
All variants are physically identical and have the same software but different defaults.
All outputs can be changed individually by operator.
|
Variant |
Rx62-1 | Rx62-2 | Rx62-22 | Rx62-3 | Details |
|
Purpose: |
Train with joystick Tx |
Train with Tx20 Tx21 Tx22 |
Train with Tx20 Tx21 Tx22 |
Conven- tional |
|
|
'H' output: (H-Bridge) |
1 |
1 |
1 |
1 |
Integrated forward/reverse ESC for brushed motors 512 step PWM control |
|
Motor control |
'Low off' | 'Center off' | 'Center off' | 'Center off' | |
|
Direction channel |
Yes |
- |
- |
- |
|
|
'P' outputs: (Pads) |
4 |
4 |
4 |
4 |
Signal pads for Servos and low current on/off switching Special programs for car lights and other switching 1024 step Servos Serial data feed |
|
eSWITCH: |
Yes | Yes | Yes | Yes |
Integrated electronic On/Off switch Includes on-board Reed switch which can make the eSwitch go on and off Requires a magnet (not included). |
|
'L' pad: |
Yes | Yes | Yes | Yes |
Lipo booster monitor Low voltage protection for a single cell lipo when used with a voltage booster The L pad should not be used with the eSwitch |
|
'Selecta':
|
- | - |
Enabled |
- |
Selecta can activate and deactivate models without touching them (Available on all variants but enabled on Rx62-22 only) |
| Size: | 11.5 x 28.2 x 4.0mm (0.5x1.1") |
||||
| Weight: | 1.3g | ||||
| Pad spacing: | 2mm (0.09") |
||||
| Voltage range: | 3-13v | ||||
| Motor current |
1.5A with 16kHz PWM (motor stalled at 100% throttle) |
||||
| Rx current: | 16mA | ||||
| Rx outputs: | 5 (see above) | ||||
| Tx channels*: | 14 max (9 tested) | ||||
| Modulation: | 2.4GHz compatible with 22ms DSM2 and DSMX Air and 16.5ms DSM2 Surface |
||||
| Range: | Indoor/Outdoor |
* = Channels that can be used to control receiver outputs (all outputs can be associated with any channel)
INSTRUCTIONS:
| Rx62-1 | Rx62-2 | Rx62-22 | Rx62-3 | Change from previous version | Version |
v610 |
v610 |
v610 |
v610 |
Toggle servo, Adjustable LVC, Prog3, Variant change (changes relative to v603) |
PROGRAMMING:
| Programming table | Feature descriptions | Version |
v610 |
v610 |